SeeSec---IoT-Vulnerablity-Scanner - SeeSec - IoT Vulnerablity Scanner

项目说明

SeeSec---IoT-

Note: IoT seeker (the codes that scans for default credentials in IoT devices – Mirai malware) is also integrated with this system. Ref -

Other integrated scanners include Nessus scanner and a custom scanner that login via ssh using 462 combinations of default/weak credentials.

Here are the Steps:

Install Mininet . 2.2.0 or higher
The required installation will depend on which integrated scan you want to run. You can run the desired integrated scanners by disabling the lines of codes that launches undesired integrated scanners.

a. Install the Nessus scanning tool on your machine and download a mininet image **if you would like to run the Nessus scanner

b. Install perl packages by cpan AnyEvent::HTTP Data::Dumper JSON **if you would like to run the Mirai scanner

In the home directory of the mininet VM, add the following python script and folders in the specified directory below. Existing components in the POX ser be o

a. Scanresults - /home/mininet/pox

b. Firewallpolices, scanserver - /home/mininet/pox/pox

c. Dhpd.py - /home/mininet/pox/proto

d. Dhcpmininet.py - /home/mininet/pox/topology

e. Firewall.py - /home/mininet/pox/pox/misc

f. Host_tracker - /home/mininet/pox/pox/host_tracker

g. Devices.cfg, iotScanner.pl - /home/mininet/pox

To run the test, log into the mininet machine via SSH using putty or any other suitable program. Open 3 terminals. First terminal for mininet network simulation, the second to start POX controller and the third to track the access control list 3.

To start the network simulation, enter the following commands;

a. sudo python ./pox/pox/topology/dhcpmininet.py- to start a network of hosts with no assigned IP_Address, sudo mn –topo single,6 - -mac - -switch ovsk - -controller remote -to start a network with static or pre-assigned IP_Adress

b. ./pox/pox.py misc.firewall openflow.discovery host_tracker.host_tracker forwarding.l2_learning proto.dhcpd -to start the POX SDN controller. This will start the POX controller and connect to the OF-switch. 5.

c. Send dhcp request for each hosts on the mininet terminal. Run sudo dhclient h1-eth1 (h1, h2, h3)

d. To view the access control list, enter the following command on the third terminal. cd pox/pox/firewallpolicies cat whitelist.csv cat blacklist.csv cat firewallpolicies.csv

e. To test the communication flow, ping hosts via the controller within the network. h1 ping –c1 h2 h2 ping –c1 h3 etc.

项目信息

开发语言：Python

Star 数：7

技术要点

该项目属于安全软件方向的开源资源，代码结构清晰，适合安全研究人员学习参考。项目围绕SeeSec - IoT Vulnerablity Scanner展开，提供了可运行的实现，对理解相关安全机制、工具原理与攻防技术具有较高的研究价值。

从技术实现角度看，此类项目的核心在于对底层原理的深入理解与工程化落地。开发者在研究过程中可以结合官方文档与社区讨论，梳理项目的初始化流程、核心模块职责与数据流转，逐步掌握其中的技术细节与设计思路。

使用与学习建议

1. 下载源码压缩包，解压到本地环境。

2. 根据项目类型准备对应的运行环境与依赖。

3. 按照 README 中的步骤完成配置与部署。

4. 在隔离的测试环境中运行验证，避免影响生产系统。

免责声明

本资源来源于开源社区，仅供安全研究、技术学习与合法授权范围内的攻防演练使用，请勿用于任何非法或侵害他人权益的用途。使用本项目产生的一切后果由使用者自行承担。